S.S. ENGINEERING VIBRO SIFTER is used to separate different sizes of solid particles.
Principle of working Vibro Sifter is to separate the solid material through Vibrating sieve.
The top weight on the Motor shaft rotates in a plane close to the centre of the Motor assembly plate.
The rotation of the top eccentric weights create a vibration in the horizontal plane which causes material to move across the screen cloth to periphery increasing the horizontal throw causing oversize material to discharge at a faster rate.
The bottom eccentric weight rotates below the centre of the plate creating tilt on the screen giving a vibration in vertical and tangential plane .Increasing the vertical component of motion, this promotes turn over of material on the screen surface helping maximum quantity of undersize material to pass through the screen. Rugged Springs placed over the circular motor base amplifies the vibration.
- Double and triple deck arrangement can be provided
- Faster output and low power consumption
- Easy dismantling and cleaning
- All contact parts made of S.S.304 or S.S.316
- Wide range of screen size 30 to 300 mesh
- Standard motor with TEFC explosion proof /flame proof
- Quick opening clamps where frequent opening is necessary due to requirement of cleaning
| SIFTER || 24” DIA|| 36” DIA || 48” DIA |
| Over all Dimensions || 800 mm L X 750mm W X 1250 mm H || 1150mm L X 1150 mm W X 1000 mm H|| 1450 mm L X 1450 mm W X 1450 mm H|
| Weight || 90 to 200 kgs|| 150 to 300 kgs || 300 to 500 Kgs|
| Speed ( R.P.M.) || 1440 RPM || 1440 RPM || 1440 RPM |
| Utility Requirement Electricity || 0.5 ph 50 Hz, 415 volts || 3 ph 50 Hz, 415 volts || 3 ph 50 Hz, 415 volts|
| Top lid Provided|| Conical in shape with hopper || Conical in shape with hopper || Conical in shape with hopper |
| Electrical Requirement || 0.5 hp || 0.5 hp || 1.5 hp |
| Power Supply || 3 phase 440V A. C.|| 3 phase 440V A. C. || 3 phase 440V A. C. |
| Total Electrical Load|| 0.5 hp || 0.5 hp || 1.5 hp |
| Clamps, Ring, Side Covers etc MOC ||SS 304/SS 316 || SS304/SS 316|| SS304/SS 316 |
| Gasket || PTFE / Food Grade Neoprene || PTFE / Food Grade Neoprene|| PTFE / Food Grade Neoprene |
| Surface Finish || Inside outside|| Inside outside || Inside outside |
| M. S. Parts || Painted || Painted || Painted |